Author: Marten Jõesaar

Date: 04.06.2025

Removing the 48V harness

Step 1: Access the Battery Compartment

In the battery compartment, remove the front battery compartment separator. Cut the zip ties that hold the harness in place.

Reference: Picture 1 in original document

Step 2: Disconnect the IoT Connector

Disconnect the IoT connector.

Reference: Picture 2 in original document

Step 3: Detach Controller Power Supply Connectors

Detach the controllers 48V power supply connectors (6 pieces).

Reference: Picture 3 in original document

Step 4: Remove the ECU

Remove the ECU in the electronics compartment:

1. Disconnect the connectors on the ECU
2. Detach the M4 nylon nuts and remove the ECU

Reference: Picture 4 in original document

Step 5: Release the Harness

Cut the zip tie holding the 48V harness in place underneath the ECU.