Leaks
ℹ️ Check for leaks at the master cylinder banjo connection ⚠️ If the master cylinder banjo connection is leaking - tighten the banjo bolt to 10 Nm, wipe off residual fluid and recheck
ℹ️ Check for leaks at the brake caliper banjo connections ⚠️ If the brake caliper banjo connection is leaking - tighten the banjo bolt to 45 Nm, wipe off residual fluid and recheck
ℹ️ Check for leaks at the 3-way brake line junction ⚠️ If the 3-way connection is leaking - tighten the connection nuts until the leak stops
⚠️ If tightening of the banjo connections does not help - replace the banjo washers and re-bleed the brake system
Damage
ℹ️ Make sure that there is no visible wear on the brake lines ⚠️ If there are wear marks on the brake lines, look for possible contact scenarios with the frame or suspension components and adjust the brake line routing accordingly ⚠️ If the steel braiding of the brake line has started to wear - the brake line must be replaced