Guide date: September 24, 2025

Tools needed

• Cordless drill
• ⌀5 mm drill bit
• Structural polymer adhesive (Würth 089322544 or equivalent)
• Cleaning agent (Isopropyl alcohol, brake cleaner, acetone, etc.)
• Fasteners kit (per 1 bracket):
  • 2× M5×35 ISO 7380-1
  • 2× DIN 985 M5 Nyloc nut
  • 2× DIN 125 5.3 washer

Mounting hardware

• Striker repair bracket (VOK2XL-A8.040 A.1) - Mounted on the outer surfaces of the cargobox.

  <aside>

  

  </aside>

Top striker bracket — repairing instructions

1. Drill out the previously installed rivets.

<aside>

</aside>

1. Bend the bracket back against the roof. Using the two pre-made furthest holes for positioning, drill through the entire roof.

<aside>

</aside>

1. Clean the area with a cleaning agent. Apply adhesive in the gap between the bracket and wall.
   • NB: Apply as far as you can reach with the adhesive’s conical tip. Do not bend the bracket excessively.

<aside>

</aside>

1. Apply adhesive on the bottom of the plate for waterproofing. Secure the striker repair bracket in place with bolts, washers, and nuts from the fasteners kit as shown, and tighten.